Explore Our Training Seminars

NFPA 101: Life Safety Code® – On-Site Only



3 Day

2.4 CEU


At the end of this seminar students will be able to:

  1. Classify occupancy and hazard of contents
  2. Analyze means of egress requirements and more
  3. Assess building service(s) and fire protection equipment

Ready to schedule training?

Select Training Dates

Need to speak to someone?

Request More Info Now
  • Why You should take this seminar

    In the NFPA 101 training, participants will learn and/or review the requirements that influence the safety of people and protection of property and equipment.

    The code addresses occupant safety throughout the life cycle of a building – for both new and existing structures. Students in our Life Safety Code seminar will review construction, protection, and occupancy features necessary to minimize danger to life from the effects of fire, including smoke, heat, and toxic gases created during a fire.

    Note: The NFPA 101 Life Safety Code® is systematically revised on a three year cycle.

    Download Seminar PDF
  • Who Should Take This Seminar

    This training is designed for anyone in the building-related field, but especially the following people:

    • Building Inspectors
    • Building Managers
    • Facility Engineers
    • Safety Inspectors
    • Code Enforcers
    • Engineers
    • Architects
    • Building Owners & Insurers
    • Building Product Manufacturers including fire suppression and alarm systems
    • Office Administrators
    • Environmental Health & Safety personnel
    • Owners & Managers
    • Warehouse Employees
    • Maintenance Technicians
    • Fire Alarm Technicians
    • Electricians
    • Plant & Facility Maintenance Technicians
    • Building Engineers
    • Building Managers & Superintendents
    • Plant & Facility Managers
    • Safety Directors
  • What You'll Learn

    During this training you will learn about the requirements that influence the safety of people and protection of property and equipment.

    Topics covered during this training include:

    • Egress
    • Sprinklers
    • Alarms
    • Emergency lighting
    • Smoke barriers
    • Special hazard protection
  • Seminar Description

    Agenda for training includes:

    • Fundamental Requirements
    • Definitions of Sections 3-1 through 3-2
    • Classification of occupancy and hazard of contents
    • Means of egress (Section 5-1 through 5-12)
      • Means of egress components
      • Capacity of means of egress
      • Number of means of egress
      • Arrangement of means of egress
      • Measurement of travel distance to exits
      • Discharge from exits
      • Illumination of distance to exits
      • Emergency lighting
      • Marking of means of egress
      • Special provisions for occupancies with high hazard contents
      • Mechanical equipment rooms, boiler rooms and furnace rooms
    • Features of fire protection (Section 6-1 through 6-6)
      • Construction and compartmentation
      • Smoke barriers
      • Special hazard protection
      • Interior finishes
      • Furnishings, contents, decorations and treated finishes
    • Building service and fire protection equipment (Section 7-1 through 7-7)
      • Utilities
      • Heating, ventilating and air conditioning
      • Smoke control
      • Elevators, escalators and conveyors
      • Rubbish chutes, incinerators and laundry chutes
      • Fire detection, alarm and communication systems
      • Automatic sprinklers and other extinguishing equipment
    • Means of egress requirements, protection, special provisions, building services, and operation features
    • One and two-family dwellings
    • Small facilities, large facilities, suitability of an apartment building to house, a board and care occupancy and operating features
    • 1. Select a date and location to register

    • 2. Confirm & Checkout

    Seminar Schedule

    By clicking the checkbox below, you certify that...

    • You are registering to take this class on behalf of your current employer/company and
    • My employer/company is paying for this training
      Returning customer? Click here to login

      Billing Information

      Your order

      Product Total
      Shaft Alignment With Laser - On-Site Only  × 1 $1,095.00
      Subtotal $1,095.00
      Shipping and Handling Free Shipping: $0.00
      Total $1,095.00
      • Please add your PO # to the purchase order field or type “Bill Me Later” to be contacted for Credit Card information.

    Call (855) 712-7353 for more info on schedule and pricing.

    Seminar Pricing

    3-Day Lecture Only:  $1,349 / participant

    This seminar may be included with other training or as a standalone class. As such, training time depends on seminar length as determined by your outcome goals. Please call (800) 922-2820 or CONTACT NTT TRAINING  to discuss pricing and your unique training needs.

    Don’t see a local seminar in your area? Call (855) 712-7353 for more info on schedule and pricing!

    100% of NTT's offering can be brought to your facility Request On-Site Training