Electrical Safety: Power Generation, Transmission & Distribution [based on OSHA 1910.269]
This training program is eligible for an early bird discount of $100 if registered 60 days out (or more) and will be automatically applied at checkout!
$995
Lecture
2 Days
CEU ELIGIBLE
At the end of this training program attendees will be able to:
- Learn how to create a safe work environment for you and your co-workers
- Review the OSHA specific requirements for working on or near high voltage electrical systems
Ready to schedule training?
Select Training DatesNeed to speak to someone?
Request More Info Now- Why This Training Program
- Who Should Take This Training Program
- What You'll Learn
- Training Program Description
- Registration
-
Why You should take this training program
NEW – This course is now available via our interactive Live Online Training format. Live Online Training course length and content may vary from our in-classroom content. Click Here to ask us about the differences.
Review OSHA electrical safety and specific requirements to work safely and efficiently for while near high voltage electrical systems. This electrical safety training program covers the training mandates under OSHA 1910.269, including the requirements to be deemed a Qualified Worker. With a seven-fold increase in OSHA’s penalty structure for violations and proposed revisions to allow harsher criminal negligence citations, you and your contractors need to be updated.
Learn how to create a safe work environment for you and your co-workers through understanding electrical hazards and proper work and protection practices.
Review the OSHA specific requirements for working near high voltage electrical systems, including personal protective grounding, equipment grounding, live line tools, PPE, and LOTO. Training will address power generation, over-head and underground lines and NESC applications.
Continuing Education Units (CEUs) and Contact Hours
Download Training Program PDF
Upon completion of this training program, the attendee will receive a certificate of completion. Please contact your state or local licensing agency to determine if this training program is accepted for Continuing Education recognition by the agency.
-
Who Should Take This Training Program
People who will benefit from attending this our electrical safety training program for power generation include:
- Electricians
- Environmental health & safety personnel
- Supervisors working on or who oversee employees working on 50V or greater equipment
- Linemen & Utility workers
- Owners & managers
Other people who are frequently impacted by this training:
- Maintenance Technicians
- Energy management personnel
- Fire Alarm Technicians
- Plant & facility maintenance technicians
- Building engineers
- Building managers & superintendents
- Plant & facility managers
- Stationary engineers
- Safety directors
-
What You'll Learn
- OSHA 29 CFR 1910.269 mandates to work safely and efficiently near high voltage electrical systems
- Qualified Worker requirements
- Understand electrical hazards, electrical shocks, and arcs and blasts
- Fault current and potential difference
- Power generation, over-head, and underground lines and NESC applications
- Personal protective grounding, live line tools, LOTO and PPE
- Electrical Safety-Related Work Practices
- OSHA Interpretation
- Relevant OSHA Standards
-
Training Program Description
INTRODUCTION TO OSHA
- Key national consensus standards NFPA 70E
- National Electric Safety Code (ANSI) aka ANSI C2
- Standards development
- American National Standards Institute (ANSI)
- American Society of Testing and Materials (ASTM)
- Institute of Electrical and Electronic Engineers (IEEE)
- National Fire Protection Association (NFPA)
UNDERSTANDING ELECTRICAL HAZARDS
- Electric shocks, arcs and blasts
- Fault current and potential difference
- Electrical safety in industrial plants
29 CFR 1910.269: ELECTRIC POWER _GENERATION, TRANSMISSION & DISTRIBUTION
- 1910.269(a): Application
- 1910.269(c): Job briefing
- Required topics
- Number of briefings
- 1910.269(d): Hazardous energy control (lockout/tagout) procedures
- Clearance procedures
- Switching procedures
29 CFR 1910.269: ELECTRIC POWER GENERATION, TRANSMISSION & DISTRIBUTION, CONTINUED
- 1910.269(g): Personal protective equipment
- Flame resistant (FR) clothing
- Rubber protective equipment
- 1910.269(i): Hand and portable power tools
- Portable equipment grounding
- Ground Fault Circuit Interrupters (GFCI)
- 1910.269(j): Live-line tools
- Primary vs secondary protection requirements
- 1910.269(l): Working on or near exposed energy parts
- Approach distances
- Safe work practices
- 910.269(m): De-energizing lines and equipment for employee protection
- Switching procedures
- Clearance procedures
- 1910.269(n): Grounding for the protection of employees
- Equipotential grounding
- Testing/maintaining grounds
- 1910.269(p): Mechanical equipment
- 1910.269(q): Overhead lines
- Minimum clearance distances
- Stringing/removing lines
- 1910.269(t): Underground electrical installations
- Protective grounding
- Special hazards
- 1910.269(w): Special conditions
- Capacitors
- Current transformers
ELECTRICAL SAFETY-RELATED WORK PRACTICES
- Qualified person requirements
- 1910.332: Training
- 1910.333: Selection and use of work practices
- 1910.333(a)(1): Work on de-energized parts
- 1910.333(b)(2) & 1910.147: Lockout/Tagout (LOTO)
- 1910.333(c): Working on or near exposed energized parts
- 1910.334(c): Test instruments and equipment
- 1910.335: Safeguards for personnel protection
- 1910.335(a)(1): Use of protective equipment
- 1910.335(a)(2): Insulated tools
APPENDICES
- OSHA interpretation
- Relevant OSHA standards
- Key national consensus standards NFPA 70E
-
Contact us regarding questions for your schedule at 1-855-712-7353.
-
1. Select a date and location to register
-
2. Confirm & Checkout
Select Training Location and Date:
By clicking the checkbox below, you certify that...
- You are registering to take this class on behalf of your current employer/company and
- My employer/company is paying for this training
Training Program Pricing
2-Day Lecture Only: $ 995 / Participant
This training program can be customized to include other classes & hands-on labs, or as a standalone course. As such, training time depends on choice of training program(s) and length as determined by your outcome goals. Please call (800) 922-2028 or Contact Us Today to discuss your unique needs.
Don’t see a local training program in your area? Call (855) 712-7353 for more info on schedule and pricing!
100% of NTT's offering can be brought to your facility Request On-Site Training -
