Sitemap
Explore Our Training Programs

Select the following link if you would like to recover a report that has been previously deleted.

NFPA 72: National Fire Alarm & Signaling Code®

This training program is eligible for an early bird discount of $100 if registered 60 days out (or more) and will be automatically applied at checkout!

$1795

Hand holding a wrench

Hands-On

3 Days

CEU ELIGIBLE

NTT Inc. - Electrical Compliance - NFPA 72: National Fire Alarm & Signaling Code®

At the end of this training program attendees will be able to:

  1. Determine which codes are applicable to fire detection and alarm systems.
  2. Understand how building occupancy requirements affect your fire alarm system.
  3. Decide where you should and should not use detectors, and the installation requirements.
  4. Avoid the most common errors.

Ready to schedule training?

Select Training Dates

Need to speak to someone?

Request More Info Now

  • Why You should take this training program

    NEW – This course is now available via our interactive Live Online Training format. Live Online Training course length and content may vary from our in-classroom content. Click Here to ask us about the differences.

    The NFPA 72 – National Fire Alarm Code was updated in 2022.

    Being up-to-date with basics of the National Fire Alarm and Signaling Code® (NFPA 72) will help improve your fire alarm and signaling system’s reliability. Participants of this NFPA 72 training will learn the fundamentals of fire alarm systems, fire alarm equipment for dwelling units, initiating devices, emergency communication systems (including mass notification), and more.

    Workers gain knowledge to ensure that your fire alarm system is working properly to achieve maximum reliability, safety and compliance.

    This training program is frequently paired with the NICET I & II test-prep course for people seeking CEUs (Continuing Education Units) or to take the NICET Certification exams.

    Continuing Education Units (CEUs) and Contact Hours
    Upon completion of this training program, the attendee will receive a certificate of completion. Please contact your state or local licensing agency to determine if this training program is accepted for Continuing Education recognition by the agency.

    Download Training Program PDF

  • Who Should Take This Training Program

    The NFPA 72 – National Fire Alarm Code was updated in 2022. Any person who maintains, or is responsible for, fire alarm systems needs to make sure they understand how to stay in compliance. Such people will benefit from this practical hands-on fire alarm training.

    People in the following positions typically participate in our NFPA 72 training:

    • Fire Alarm Technicians and Contractors
    • Electricians
    • Facility Maintenance Technicians
    • Building Engineers / Stationary Engineers
    • Safety directors
    • Facility Managers

  • What You'll Learn

    The National Fire Alarm & Signaling Code training program includes classroom environment training, in addition to practical hands-on labs. If you bring us to Your House (i.e. if you bring us on-site) we can tailor the content to fit your needs.

    Participants learn to identify various components of a typical fire alarm system, recognize differences in requirements between NFPA 72, ADA (ADAAG) and UFAS documents; and will be able to lay out a fire alarm system using basic components (i.e., manual alarm stations, alarm bells, detectors, etc.).

    Topics covered during training include:

    • What codes are standard
    • Where you should and should not use detectors
    • Fundamentals of fire alarm systems
    • Fire warning equipment for dwelling units
    • Protected premises fire alarm systems
    • Supervising station fire alarm systems
    • Initiating devices
    • Inspection, testing, and maintenance
    • Cybersecurity
    • Color tagging

    Hands-On Lab Exercises

    • Required battery supply calculations
    • Battery charger sizing and recharge periods
    • Voltage-drop calculations
    • Sizing strobes in various room sizes
    • Computing air changes for high air-movement areas
    • Supervisory and alarm currents calculations
    • Determining proper wire sizes for delivery of sufficient power to notification appliances
    • Interpretation of NFPA 101 and 72
    • Designing the layout of various case studies
    • Wiring and testing systems, plus observing repetitive deficiencies

  • Training Program Description

    Fundamentals of Fire Alarm Systems

    • Terminology and definitions
    • Purpose of Alarm Systems
    • Current applicable codes
    • Fire Alarm Reliably
    • Circuit designations and repetitive deficiencies
    • IDC, and NAC circuit installation requirements and pitfalls
    • Coordination with other related systems
    • Available signal transmission methods
    • Classification of protective signaling systems
    • SLC circuit installation requirements

    Power Supplies

    • Requirements for the Primary (Main) Power Supply
    • Requirements for the Backup Power Supply (Typically Batteries)
    • Sizing of a Battery System

    Inspection, Testing and Maintenance; Documentation

    • Who is responsible for testing
    • Required documentation and certification
    • Proper testing techniques of initiating devices
    • Required testing of notification appliances
    • Testing of system wiring

    System Design Principles

    • Circuits and pathways
    • Typical system designs

    Initiating Devices

    • Review of various types of detectors
    • Principles of operation of the various automatic detectors
    • Choosing the right detector for the right location
    • Heat detector selection
    • Environmental factors in smoke detection
    • Smoke detection for air duct systems
    • Detectors in high air movement areas
    • Location requirements for components
    • Location requirements for manual stations
    • Location requirements for CO detectors

    Notification Appliances

    • NFPA and ADA requirements for notification appliances
    • Notification appliance location with audible, visible and graphical requirements

    HANDS ON LAB EXERCISES

    • “As-built” point-to-point wiring schematics
    • Device compatibility document
    • Initiating device circuit
    • Notification appliance circuit
    • Signaling line circuit
    • Smoke detector sensitivity test
    • CO detector test
    • Visual and functional tests
    • Layout of a fire alarm system for an ambulatory care facility

  • Contact us regarding questions for your schedule at 1-855-712-7353.

    • 1. Select a date and location to register

    • 2. Confirm & Checkout

    Select Training Location and Date:

    By clicking the checkbox below, you certify that...

    • You are registering to take this class on behalf of your current employer/company and
    • My employer/company is paying for this training
      Returning customer? Click here to login
      Have a coupon? Click here to enter your code

      Billing Information

      Your order

      Tax may be applied to total purchase amount depending on your tax-exempt status.

      Payment Method

      • Please add your PO # to the purchase order field or type “Bill Me Later” to be contacted for Credit Card information.

    Call (855) 712-7353 for more info on schedule and pricing.

    Training Program Pricing

    3-Day Hands-On + Lecture: $1,795

    This training can also be combined with our NICET I & II test-prep for a 5-day training program. Please call (800) 922-2820 or Contact NTT Training to discuss pricing and your unique training needs.

    Don’t see a local training program in your area? Call (855) 712-7353 for more info on schedule and pricing!

    100% of NTT's offering can be brought to your facility Request On-Site Training
SKILLED WORKERS. STRONGER COMPANIES